4340 Connecting Rods for Volvo 850 C70 T5 V70 2.3L Conrod Pleuel ARP 2000 Bolts

Introduction

MaXpeedingRods H-beam connecting rods are designed for demanding racing applications to increase horsepower and efficiency. The strength is suitable for high-horsepower applications while keeping the weight light. Professional processing makes it have super high wear resistance and excellent durability.

Application

Compatible for Volvo 850 C70 V70 S60 S70 2.3 T5 R AWD B5234T

Fitment Details:

Compatible for Volvo 850 LS 1991-1997 Saloon 2.3 T5, 2.3 T5-R, 2.3 Turbo R

Compatible for Volvo 850 LW 1992-1997 Estate 2.3 T5, 2.3 T5-R, 2.3 Turbo R

Compatible for Volvo C70 I MK I 1997-2005 Coupe 2.3 T-5, 2.3 T5

Compatible for Volvo C70 I MK I 1997-2005 Convertible 2.3 T-5, 2.3 T5

Compatible for Volvo S60 I MK I 2000-2010 Saloon 2.3 T5, T5

Compatible for Volvo S70 LS 1996-2000 Saloon 2.3, 2.3 T5 AWD

Compatible for Volvo V70 P80_ 1995-2000 Estate 2.3 Turbo, 2.3 T-5, 2.3 AWD, 2.3 T-5 AWD

Compatible for Volvo V70 MK II 1999-2008 Estate 2.3, 2.3 T5

NOTE：Big end has no bearing notches.

Specification

*Type: Forged 4340 aircraft chrome moly quality steel for racing

*H-beam Conrods Quantity: 5 Pieces as showing in picture

*Bolts: Including Genuine ARP 2000 3/8" bolts  (Note: Extra cost for upgrading to ARP L19 bolts)

*The connecting rods all include ARP 2000 bolts, which are rated at 220,000 psi, and the optional ARP L19 material at 260,000 psi is available as an upgraded product.

*Advertised Horsepower Rating:200HP/piece

*Top acceleration: 9000rpm

*package size：28CM*21CM*14CM

Dimension

Center to center length:139.5mm/5.492"

Big end diameter:53mm/2.087"

Small end diameter:23mm/0.906"

Big end width:25.7mm/1.012"

Small end width:25.7mm/1.012"

Feature

1. TüV Certification Con Rods；

2. Material: Forged SAE 4340 Chrome Moly Steel for the highest strength and durability, dedicated for Racing； 

3. Genuine ARP 2000 bolts ,Optional ARP L19 fasteners available as an upgrade；

4. H-Beam design reduces weight without compromising strength；

5.Heat-treating & Shot-peened for remained consistent and strong. Shot-peened finish to remove potential for stress risers； 

6.High precision CNC machined,Precision rod cap alignment dowels；

7.Bores finished to +/- .01 mm；

8.Balanced to within +/- 1 g per rod；

9. Each rod is magnetic particle tested to ensure free of flaws；

10.Use X-rayed, sonic tested；

11.Custom Service.

Note

*There are titanium-plated upgrade models；

*Professional installation is highly recommended ；

*Custom Service:If there's no conrods you need on our site, we would be happy to help determine your requirements and develop a solution with you to satisfy your needs.